SERVICES
Large-Bore Frac Iron
- This next generation monoline is a large bore, high-pressure missile that utilizes a modular design to create speed and efficiency regardless of your frac pad configuration
- The 7-1/16, 15k PSI frac iron is mounted on fully adjustable stands that can be moved with a telehandler
- High pressure hoses almost eliminate the need for 1502 frac iron
- The linear design allows for maximum power to the wellbore
- Integrated low pressure water manifold is mounted on top of the main line
- Fewer connections means improved safety and environmental impact

Environmental Spill Containment
- Constructed from UltraTech’s heavy-duty, 40mil, textured polyethylene liner provides a rugged, impermeable barrier to capture leaks and spills.
- The liner is resistant to oil-based mud, diesel as well as various other chemicals including HCL acid, it can also be patched and repaired if a tear does occur
- The versatility of the liner allows it to be reused again and again which help to reduce our carbon footprint
- GPOR can custom build and modify the size on location. Sizes range from 4’ x 4’ to as long as 200’
- Containment walls can be 4” or 6” drive-over foam or 24” modular jersey walls for high-capacity spill containment
- Disposable 30 mil polyethylene is available as well


Composite Mats
- Megadeck HD Composite Mats provides a strong, stable ground covering over the most uneven services
- Each mat is 6.5’ x 13’ (84.5 square feet)
- Overlapping flanges interlock to create one continuous surface that prevents separation under heavy rolling loads
- Made from non-toxic HDPE, which protects vegetation and environmentally sensitive areas

Frac Tanks
- 500 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
- External or internal 8” manifold systems
- Easy access stairs and platforms
- Candy cane fill lines 3” and 6”

Mud Tanks
- 500 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
- Round bottom, 6” mixing line (gunline) with five mixing nozzles throughout the tank
- Carboline Phenoline 310 internal coating, minimum 15 mil
- Dual 6” and 8” manifolds, with three 4” threaded connections on both
- Rear 4” drain, with an attached butterfly valve and remote handle
- Two 22” manway hatches and two non-sealable roof hatches

OBM Tank System
- GPOR’s round bottom mud tanks in conjunction with a diesel or electric pump
- Allows our customers to roll mud on location between jobs, avoiding transport of the oil-based mud (OBM) back to the vendor for reconditioning


Acid Tanks
- Fiberglass lined for maximum protection against leaks
- 480 BBL capacity
- Axle mounted flat top for easy transportation with a winch truck
Gas Busters
- 500 BBL capacity
- Double barrel, open top
- Axle mounted for easy transportation with a winch truck

Blowout Preventers
- Sizes 7-1/16”, 11” and 13-5/8”
- Double and single
- Type U, UM, 70 and 81
- Pressure ranges 5M, 10M, and 15M
Hevi-Wate Drill Pipe
- Sizes from 3-1/2” to 5”
- Conventional and spiral
Drill Collars
- Sizes from 4-3/4” to 8”
- Conventional and spiral
Drill Pipe
- Sizes 3-1/2” IF, 4” FH, 4” XT-39, 4” TSC-39
- Grades S135
- Premium high-torque connections available
- Includes all associated handling tools

Tubing
- Sizes 2-3/8” EUE, 2-3/8” PH-6, 2-7/8” PH-6
- 2-3/8” PH-6 and 2-7/8” PH-6 Grade P-110 are both hard banded

Glycol Heaters
- Wacker Neuson CH5000 Hydronic Surface Heaters
- Heat output 650k BTU
- Operating temperature 180 DEG F
- Hose length 4000’
- Heat efficiency 83%


Indirect Heaters
- Allmand Maxi-Heat 1000
- Insero Indirect Heater HT1010D
- Heat output dual 500k BTU

Air Drilling Services
Compressors
- Ingersoll Rand 1170 CFM with a rated discharge pressure of 350 PSI
- Doosan 1250 CFM with 350 PSI rated discharge pressure
- Environmentally friendly, self-contained skids with drains to capture any rogue liquids
- Caterpillar C-15 diesel engine rated for 525 bhp @ 1800 RPM
- A primary inline fuel filter system that is contained and set prior to all equipment
Boosters
- Gardner Denver WB12, 2-stage “Y” frame 6.5” x 5” with HD oilfield skid
- 1st stage – 5100 CFM flow with a rated discharge pressure of 600 PSI
- 2nd stage – 3270 CFM flow with a rated discharge pressure of 1400 PSI
- Gardner Denver WB12, 2-stage “Y” frame 7” x 5” with HD oilfield skid
- 1st stage – 4200 CFM flow with a rated discharge pressure of 600 PSI
- 2nd stage – 3800 CFM flow with a rated discharge pressure of 1400 PSI
- Double acting, water-cooled, pressure-lubricated direct-drive units
- Caterpillar C-18 diesel engine rated for 630 bhp @ 1800 RPM
- Environmentally friendly, self-contained skids with drains to capture any rogue liquids
- Environmental condensation collection tank designed to capture condensate from the booster for proper disposal
Soap Houses
-
- Mist pump houses with dual 30 BBL water tanks including electric load pumps to support the water tanks
- Shutoff/isolation valves included for water recirculation
- Dual FMC model L1122D mist pumps, electronically driven and controlled by variable frequency drives
- A redundant system is designed to operate simultaneously with a second pump for immediate back-up
- Mist pumps are rated at 40 GPM for a total of 80 GPM maximum and pressure relief valves
- Heated enclosures include circulation fans and ceiling I-beams easy pump removal and replacement


